Arkansas State Flag Size Guide: What Size Arkansas Flag Should You Fly?
Share
Authority Standards for the Natural State Flag
Textile Engineering for Delta Humidity, Ozark Winds, and Valley UV Exposure
The Arkansas state flag—with its bold red field, white diamond, and blue-starred border—is a masterclass in heraldic geometry. However, flying "The 25th State" flag in Arkansas requires more than just a flagpole; it requires an expert understanding of regional environmental stress. From the dense, heavy air of the Mississippi Delta to the high-velocity "gust-alleys" of the Ozark Mountains and the stagnant heat of the Arkansas River Valley, your flag is subject to unique atmospheric degradation.
Using an incorrectly weighted flag in Little Rock or Fayetteville leads to "fly-end fatigue," where sudden thunderstorms and humidity-weighted fabric cause rapid fiber breakdown. This authoritative guide details the precise sizing and material specifications required to ensure your Arkansas flag maintains its structural integrity and vibrant red hue against the Natural State’s erratic weather patterns.
The Engineering of Scale: Arkansas Pole-to-Flag Ratios
To achieve a professional, balanced aesthetic that withstands Arkansas wind shear, we adhere to the Rule of Quarters. For in-ground flagpoles, the length of the flag should be approximately 25% of the total pole height. In wind-prone areas like the Arkansas Delta or open ridge-lines in the Ouachitas, staying strictly within these ratios prevents excessive torque on the flagpole hardware.
Arkansas Flag Size Calculator
Find the perfect Arkansas state flag size for your display location. Select your installation type below to see our recommendations.
Porch, garage, wall bracket
Most homes, standard flagpoles
Larger homes, small businesses
Commercial properties, offices
Office, school, ceremony display
Recommended Arkansas Flag Size
Based on your selection, here's what we recommend:
| Pole Height | Standard AR Flag Size | Regional Application |
|---|---|---|
| 5' - 6' (Wall-Mount) | 3' x 5' | Residential Porches & Historic Homes |
| 20' (Residential) | 3' x 5' | Suburban Lawns (Bentonville, Jonesboro) |
| 25' (Commercial) | 4' x 6' or 5' x 8' | Farms, Rural Estates, & Schools |
| 35' - 50' (Flagship) | 6' x 10' or 8' x 12' | Municipal Centers & Corporate Plazas |
Material Science: Defending the Red, White, and Blue
The Mountain Defense: 2-Ply Spun Polyester
For ridge-line properties in the Ozark or Ouachita National Forests—where wind speeds can escalate rapidly—we mandate 2-Ply Spun Polyester Arkansas Flags. This open-weave fabric is engineered to allow high-velocity air to flow through the textile, significantly reducing the "cracking" force at the fly end. It is the only choice for exposed hilltop locations or open farmland in the Grand Prairie.
The Valley Standard: 200-Denier Nylon
In the Arkansas River Valley and the Delta, where humidity is high and winds are often moderate, 200-Denier Nylon is the preferred material. This fabric provides superior "lift," allowing the flag to fly even in stagnant thermal breezes. Our nylon is treated with industrial UV-blockers to prevent the vibrant red from "pinking" due to the intense southern sun exposure.
If you’re deciding between fabrics, understanding how long Arkansas State flags last outdoors can help you choose the right material for your environment.
Etiquette: The Arkansas Display Protocol
According to standard protocol, the U.S. Flag must always fly above the Arkansas flag if they share a single pole. To maintain a respectful and clean silhouette, the Arkansas flag should be the same size or slightly smaller than the U.S. flag. On a standard 20' residential pole, a dual 3'x5' setup is the most common and balanced display.
Frequently Asked Questions (FAQ)
Q: My Arkansas flag fades to pink; how can I stop this?
A: Fading is caused by UV breakdown. Ensure you are using high-quality nylon with UV inhibitors, and rotate your flags every 90 days to reduce consecutive sun exposure.
Q: When should I take my flag down in Arkansas?
A: Arkansas is prone to severe thunderstorms and high winds. We recommend lowering all flags if wind gusts are forecasted to exceed 40 MPH to protect your flagpole hardware and the flag's fibers.
American-Made Durability for the Natural State
Tidmore Flags: Expertly engineered for the Ozark ridges, the Delta plains, and the Valley heat.
Technical & State References:
- Arkansas Secretary of State: Official Arkansas State Flag History and Design Specifications
- NWS Little Rock: Regional Wind and Humidity Data for the Natural State
- FMAA: Standards for American-Made Flag Textile Performance
